How to replace the holy grails useless “flerb” setting with a room reverb using only two tiny jumper wires.
1. Take your holy grail apart.
2. Locate the switch.
3. Solder a jumper between the 2 middle lugs of the switch. The brown wire should be soldered to one of them already.
4. Solder a second jumper from the yellow wires lug to the lug in the opposite corner.
5. Plug it in.
6. Switch to the flerb setting only to find it has been replaced with a room reverb.
7. Thanks Darrell you’re the greatest.
There’s also a way to switch between long and short reverbs for each algorithm but It’s slightly more complicated so I’ll save that for anyone desperate enough to ask….
How to replace the holy grails useless “flerb” setting with a room reverb using only two tiny jumper wires.
1. Take your holy grail apart.
2. Locate the switch.
3. Solder a jumper between the 2 middle lugs of the switch. The brown wire should be soldered to one of them already.
4. Solder a second jumper from the yellow wires lug to the lug in the opposite corner.
5. Plug it in.
6. Switch to the flerb setting only to find it has been replaced with a room reverb.
7. Thanks Darrell you’re the greatest.
There’s also a way to switch between long and short reverbs for each algorithm but It’s slightly more complicated so I’ll save that for anyone desperate enough to ask….
@whitepawsound
Gonna possibly do this one day, even though I kinda like the flerb setting.
thevideowall reblogged this from apileofsmiles and added: Is this applicable to the nano HG?
samitch04 liked this
kriskingguitar liked this